How to maintain the air system of self feeding mixer truck?

如果在空的正常運行過程中氣體回路系統發生故障，驅動力將線性下降，并且無法正常啟動的現象將變得非常嚴重。

If the gas circuit system fails during the normal operation of the compressor, the driving force will decrease linearly, and the phenomenon of failure to start normally will become very serious.

1.自上料攪拌車空壓機應水平安裝，固定并通風。

1. The air compressor of self feeding mixer truck shall be installed horizontally, fixed and ventilated.

2.強大的抗風雨能力，不暴露在陽光下。

2. Strong weather resistance, not exposed to the sun.

3.調整氣動自動開關的上限和下限。如果壓力太低，氣缸會減速，如果壓力太高，氣動系統的氣密性會降低。

3. Adjust the upper and lower limits of the pneumatic automatic switch. If the pressure is too low, the cylinder will decelerate; if the pressure is too high, the air tightness of the pneumatic system will be reduced.

4.使用自上料攪拌車檢查油位，并確保油位在量油尺的頂線和底線之間。當油位接近下，添加新油。

4. Use the self feeding mixer to check the oil level and ensure that the oil level is between the top line and the bottom line of the dipstick. When the oil level approaches the lower limit, add new oil.

5.確保皮帶正確張緊。用手指推動皮帶，使其松開約10毫米。更換傳送帶時，一定要更換整個組以保持共同的張力。

5. Ensure that the belt is properly tensioned. Push the belt with your fingers to loosen it by about 10mm. When replacing the conveyor belt, be sure to replace the entire group to maintain the common tension.

6.由于氣體系統中充滿油，因此需要足夠量的油和足夠的正常運行。只有這樣，才能同時使用獨立式混合器的功率來延長氣體系統的使用壽命。

6. Since the gas system is full of oil, sufficient oil and sufficient normal operation are required. Only in this way can the power of the independent mixer be used at the same time to extend the service life of the gas system.

以上就是為大家介紹的有關全自動自上料攪拌車廠家的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.hu198.com/

The above is the detailed introduction of the manufacturer of automatic self feeding mixer truck. I hope it will help you. If you have any questions, please contact us. We will provide you with services with a professional attitude http://www.hu198.com/