In fact, the shaft end seal has always been a common problem in the design and manufacture of forced concrete mixer at home and abroad. In order to improve the technical content of concrete mixer, improve the sealing problem of shaft end of mixer, improve the performance of the whole machine, and enhance the market competitiveness, the R & D and design team of our company focused on the principle of shaft end seal after searching for data from many parties, and proposed a new one Design idea:
              

　　1.改變密封形式，采用浮動密封加油脂密封的形式，前后形成四道機械密封；

　　1. Change the seal form, adopt floating seal and grease seal, form four mechanical seals before and after;

　　2.改變密封圈與內浮封座的接觸面形式；

　　2. Change the contact surface form between the seal ring and the inner floating seal seat;

　　3.密封圈采用特殊材質，提高密封效果，延長密封件使用壽命；

　　3. The seal ring is made of special material to improve the sealing effect and prolong the service life of the seal;

　　4.加油系統采用四個立泵芯分別向四個軸頭供油，避免了使用分流閥的堵塞，減少維修和保養的工作量；

　　4. Four vertical pump cores are used in the refueling system to supply oil to the four shaft heads respectively, so as to avoid the blockage of diverter valve and reduce the workload of repair and maintenance;

　　5.軸端加裝潤滑油檢測點，以檢測潤滑油脂是否真正到達軸頭。

　　5. Install lubricating oil detection point at the shaft end to detect whether the lubricating grease really reaches the shaft head.