The water temperature of the mixer is very easy to be too high. If the temperature is too high, it will affect the normal use of the equipment. Let's introduce the solution to the high water temperature of the concrete mixer:
一、冷卻風扇不轉,冷轉風扇可能由溫控開關控制;也可能由水溫傳感器控制。
1、 If the cooling fan does not turn, it may be controlled by the temperature control switch or by the water temperature sensor.
二、不能及時冷卻
2、 Unable to cool in time
1.防凍液:要求一年四季都要加注防凍液。
1. Antifreeze: it is required to add antifreeze all year round.
2.水或蒸餾水:臨時代用。3.水箱蓋漏水。
2. Water or distilled water: temporary substitute. 3. The water tank cover is leaking.
三、水箱堵塞
3、 Water tank blocked
1.外部堵塞應用水或氣將臟物除掉。
1. The external blockage shall be removed with water or air.
2.內部堵塞會影響冷卻液的循環,同時會產生壓力,這時會有兩種結果,一種是水箱漏水,另一種是在高速行駛時水溫特別高。
2. Internal blockage will affect the circulation of coolant and generate pressure at the same time. At this time, there will be two results, one is water leakage in the water tank, the other is that the water temperature is particularly high when driving at high speed.


四、水泵故障
4、 Water pump failure
1.葉輪打滑或卡死導致正時皮帶斷掉;
1. Timing belt is broken due to impeller slipping or jamming;
2.葉輪變形。
2. The impeller is deformed.
五、汽缸損蝕
5、 Cylinder erosion
1.燃燒室與水道沖,這時會從排水管排水或排白煙,造成水箱經常性缺水。
1. When the combustion chamber flushes with the water channel, water will be drained from the drain pipe or white smoke will be discharged, resulting in frequent water shortage of the water tank.
2.水道與油道沖(機油有水呈白色)。
2. The water channel and oil channel are flushed (water in the engine oil is white).
3.水道與水道沖,造成缸體散熱不良,尤其在高速時影響更大。
3. The water channel flushes with the water channel, resulting in poor heat dissipation of the cylinder block, especially at high speed.
4.水道堵。
4. The water channel is blocked.
自上料混凝土攪拌罐車水溫過高的解決方法就介紹到這里了,水溫一旦過高需要及時解決,否則容易對車輛造成損傷。
The solution to the high water temperature of the concrete mixer is introduced here. Once the water temperature is too high, it needs to be solved in time, otherwise it is easy to cause damage to the vehicle.