How to maintain the mixer at high temperature?

　　1. 防止機體過熱:由于環境溫度高，發動機容易過熱。要加強對發動機冷卻系統的檢查和維護。這包括檢查水箱、恒溫器、水泵、風扇等，并注意及時安裝。注意冷卻水。當水溫超過100℃時，在陰涼處停車降溫，讓發動機空轉，打開引擎蓋幫助散熱。

　　1. Prevent the engine from overheating: due to the high ambient temperature, the engine is easy to overheat. Strengthen the inspection and maintenance of the engine cooling system. This includes checking the water tank, thermostat, water pump, fan, etc., and paying attention to timely installation. Pay attention to the cooling water. When the water temperature exceeds 100 ℃, stop in the shade to cool down, let the engine idle, open the engine cover to help cool down.

　　2、防止發動機爆燃:夏季溫度較高，有時超過35℃，而在這樣一個季節，對于一些老化的汽車零部件，自然爆燃的概率要高得多。所以做好準備。

　　2. Prevent engine deflagration: the temperature is higher in summer, sometimes over 35 ℃. In such a season, for some aging auto parts, the probability of natural deflagration is much higher. So be prepared.

　　3、防止車漆損壞:車漆經過強烈的陽光照射后，會老化、起皺，而一般的美容蠟會起到一定的防曬作用，但由于任何車蠟含有鉍成分，長時間的紫外線照射會使油漆生銹留下小黑點。汽車蠟本身并不能提高硬度或抗紫外線能力，但它在高溫下很快就會消失。停車時，注意把車停在陰涼處。

　　3. Prevent paint damage: paint will age and wrinkle after strong sunlight, while general beauty wax will play a certain role in sun protection. However, due to bismuth content in any car wax, long-term UV irradiation will make paint rust and leave small black spots. Car wax itself does not improve hardness or UV resistance, but it will soon disappear at high temperature. When parking, park in the shade.

　　4、防止汽車輪胎爆胎:當溫度過高時，更容易爆胎，當溫度過高時，輪胎容易變形，抗拉強度降低。至于輪胎本身，壓力不達標，輪胎老化，性能變差，或者在行駛過程中輪胎被軋制成硬質金屬或其他硬質材料，會導致汽車爆裂。

　　4. Prevent tire blowout: when the temperature is too high, it is easier to blow out. When the temperature is too high, the tire is easy to deform and the tensile strength is reduced. As for the tire itself, if the pressure is not up to standard, the tire is aging, the performance becomes poor, or the tire is rolled into hard metal or other hard materials during driving, it will cause the car to burst.

　　由于給料機高溫維護是這樣的，希望對您有所幫助：http://www.hu198.com/

　　As the high temperature maintenance of feeder is like this, I hope it can help you.