1. Water reducing agent on the belt: water reducing agent is a kind of concrete additive which can reduce the water amount of mixing under the condition of maintaining the concrete slump unchanged. It can be carried with the vehicle, which can adjust the concrete well.

2、回廠檢查罐內水量：每次出車任務完成回到站內的時候，檢查儲水罐內的水量，讓水罐中的水隨時處于滿罐的狀態，以備不時之需。

2. Check the water quantity in the tank: when the task of leaving the train is completed and returned to the station, check the water quantity in the water storage tank, so that the water in the tank is in full condition at any time, in case of any time.

3、離廠前檢查混凝土質量：可能會因為原料的不同，每一盤混凝土質量都會有變化。

3. Check the quality of concrete before leaving the factory: it may change the quality of each plate of concrete due to the different raw materials.

4、減少車輛行駛時間：混凝土運距一般在直徑30千米范圍以內，出車之前規劃好路線以及車輛通行情況。

4. Reduce vehicle driving time: the concrete transportation distance is generally within 30 km in diameter. Route and vehicle traffic conditions are planned before leaving the train.

5、減少損失先卸料：如果遇到人為因素或者不可抗因素，導致長時間無法卸料的情況，一旦發現混凝土開始凝結，在報備負攪拌責自動上料混凝土攪拌車防止粘罐的方法人之后立刻進行卸料，以防整個罐體報廢。卸料前讓攪拌罐全速運轉一兩分鐘。讓混凝土充分?jǐn)嚢?，必要時可以加一些水，讓混凝土攪拌得更均勻，也方便卸料。卸料不要大意和放料工打好關系。放料時盡量自己看著，免得放料工亂操作放料操作桿，每次罐子正反轉中間位子時盡量停一下，保護減速機，托輪等。與放料工打好關系，卸料時也不要睡的太熟，萬一工人鬧情緒，把你車子放到工地不轉罐子，造成悶罐就麻煩了。

5. Unloading first to reduce losses: if the artificial factors or irresistible factors are encountered, which causes the material can not be unloaded for a long time, once the concrete starts to set, the unloading shall be carried out immediately after the person reporting the method of automatic feeding mixer with the responsibility of mixing to prevent the tank sticking, so as to prevent the whole tank from being scrapped. Allow the mixing tank to run at full speed for a minute or two before unloading. Let the concrete be fully mixed, and add some water if necessary to make the concrete mix more evenly and facilitate unloading. Do not take the unloading effort to make a good relationship with the discharging workers. When discharging, try to watch it yourself, so as not to operate the discharge lever randomly. Stop the middle position as much as possible when the tank is turning the middle position to protect the reducer, supporting wheel, etc. It is necessary to have a good relationship with the discharging workers. Do not sleep too well when unloading. In case of any trouble, put your car on the site without turning the cans, causing trouble with the stuffy cans.

6、攪拌罐一定要仔細地沖洗干凈。洗罐子時一定要仔細的沖洗干凈，并把水反復的正反轉兩次，再放出來，然后一趟時把水箱的水全部放進罐子，再回到站加水清洗罐子。

6. The mixing tank must be carefully washed. When washing the tank, it is necessary to carefully wash it, and turn the water back and forth twice, then put it out. Then, put all the water in the tank at one time, and then go back to the station and add water to clean the tank.

今天的精彩內容由攪拌機價格提供，真誠為您提供滿意的服務，如果您有疑問或者是問題請歡迎來電咨詢，或者是進入我們的網址：http://www.hu198.com

Today's wonderful content is provided by the price of China Science mixer. We sincerely provide you with satisfactory service. If you have any questions or questions, please contact us or enter our website: http://www.hu198.com