1. When designing the feeding device, the cement and fly ash inlets are set between the two mixing shafts, and the feeding angle is set along the mixing axis.

　　2. 在強制混合機的制造過程中，必須保證噴水裝置的安裝和焊接位置，以達到?jīng)_洗點的正確位置和沖洗方向。在攪拌器供水系統的設計中，應保證沖洗壓力的可靠性。可加裝沖洗專用壓力泵或采用高水箱。

　　2. In the manufacturing process of the forced mixer, the installation and welding position of the water spray device must be ensured to reach the correct position and flushing direction of the flushing point. In the design of agitator water supply system, the reliability of flushing pressure should be ensured. Special pressure pump for flushing or high water tank can be installed.

　　3.提高強制混合機的產能利用率。水泥全自動自上料攪拌車的用途是機械攪拌水泥混凝土，其種類較多，分類方法和特點如下。按運行方式分為循環運行和連續運行兩種。進料、混合、出料三道工序按一定的時間間隔進行，即按份混合。由于混合料的稱量準確，混合質量好。大多數使用這種類型的操作。上述三種連續操作過程是在一個長圓柱體中連續進行的。雖然其生產率高于循環操作，但由于混合比和攪拌時間難以控制，導致攪拌質量較差。少使用。

　　3. Improve the capacity utilization of the forced mixer. The purpose of cement concrete mixer is mechanical mixing of cement concrete, which has many kinds. The classification methods and characteristics are as follows. According to the operation mode, it can be divided into two types: circulation operation and continuous operation. The three processes of feeding, mixing and discharging are carried out at a certain time interval, i.e. mixing by parts. Due to the accurate weighing of the mixture, the mixing quality is good. Most use this type of operation. The above three continuous operation processes are carried out in a long cylinder. Although its productivity is higher than that of the circulation operation, the mixing quality is poor because the mixing ratio and mixing time are difficult to control. Use less.

　　4、檢查皮帶輥的工作情況，檢查電機的工作情況，確保溫升正常。全自動自上料攪拌車是工程建設中非常重要的機械設備，它將水泥、砂石和水等構件按一定比例攪拌得到非常均勻密實的混凝土，還在很大程度上對鋼筋混凝土進行塑化;此外，根據本工程施工過程中的要求和標準，對自上料混凝土攪拌罐車的結構和性能設計進行了設計。在攪拌過程中，混凝土構件之間可以通過無數次的運動和交匯來實現充分的接觸。

　　4. Check the operation of the belt roller and the motor to ensure that the temperature rise is normal. The concrete mixer is a very important mechanical equipment in the construction of the project. It mixes the cement, sand, water and other components in a certain proportion to obtain very uniform and dense concrete, and also plasticizes the reinforced concrete to a large extent. In addition, according to the requirements and standards in the construction process of the project, the structure and performance design of the concrete mixer are designed. In the mixing process, the concrete components can be fully contacted by numerous movements and intersections.

　　以上就是全自動自上料攪拌車的相關知識，如果您還想了解更多可以點擊官網進行咨詢：http://www.hu198.com/

　　The above is the relevant knowledge of Zhongke self feeding mixer. If you want to learn more, you can click the official website for consultation: http://www.jufengjiabanji.com/