For the concrete mixer, the use process of the engine is the top priority, so it should be reasonably maintained in the process of daily use.

1、將混凝土攪拌機電器用塑料薄膜遮罩，再用半濕性毛巾將薄膜上部位置進行壓蓋，從而得以避免高壓水沖進分電器，致使攪拌車難以啟動。

1. The electric appliance of the concrete mixer is covered with a plastic film, and then the upper part of the film is covered with a semi wet towel, so as to avoid high-pressure water rushing into the distributor, making it difficult to start the mixer.

2、在使用高壓水槍時，應由發動機側面按從上到下將引擎室內側、發動機外表的附著污物沖洗干凈。

2. When using the high-pressure water gun, the attached dirt on the inside of the engine room and the outside of the engine shall be washed from top to bottom from the side of the engine.

3、直接將清洗劑均勻噴灑在泅濕后的混凝土攪拌機發動機、引擎室周圍。

3. Directly spray the cleaning agent evenly around the concrete mixer engine and engine room after swimming.

4、等閃涼3min后，利用纖維毛刷清洗引擎室內所能觸及到的所有部件。

4. After 3 minutes of flash cooling, clean all parts that can be touched in the engine room with a fiber brush.

5、利用高壓水槍對污物進行快速沖洗、刷洗過程。

5. The high-pressure water gun is used to quickly wash and brush the dirt.

6、再將清洗劑噴灑于引擎表面，操作步驟同上。周而復始，直至將混凝土攪拌機發動機外表清洗干凈。

6. Then spray the cleaning agent on the engine surface, and the operation steps are the same as above. Cycle until the surface of the concrete mixer engine is cleaned.

混凝土攪拌機設備在平常使用的過程中一般都是三分使用，七分保養才行。這樣才能夠長時間的保持攪拌機設備在使用中的各種操作性能，在詳細了解關于攪拌機設備發動機的保養知識之后，我們在實際操作中一定要根據正確的操作方式來進行合理的保養。

Concrete mixer equipment is generally used in three parts and maintained in seven parts during normal use. Only in this way can we maintain the various operating performance of the mixer equipment in use for a long time. After knowing the maintenance knowledge of the mixer equipment engine in detail, we must carry out reasonable maintenance according to the correct operation mode in actual operation.